1
关注
1169
浏览

the interests in the review of metallicpowder materials for additive?

您还未登录!暂时最多只可查看 1 条回答

登录! 还没有账号?去注册

si4520 一阶会员 用户来自于: 广东省深圳市
2023-09-18 20:50

The technical review of metallic powder materials foradditive manufacturing in dentistry mainly focus on three aspects:the performance requirements of metallic powder for additivemanufacturing in dentistry, the process parameter validation ofadditive manufacturing and the performance of printed test piecesafter additive manufacturing and forming.The performancerequirements of metallic powder for additive manufacturing indentistry include but not limited chemical composition (oxygen,hydrogen and impurity elements), sphericity, powder particle sizeand size distribution, fiowability, apparent density, and tap densityFor process parameter validation of additive manufacturing, it is necessary to clarify the printing parameters of the printing equipmentand printing equipment systems compatible with the productincluding but not limited to laser power, spot diameter, scanninginterval, powder spreading thickness and scanning speed. In additionit is necessary to submit the validation and verification report onvarious parameters and specify the relevant parameters in producttechnical requirements (PTR) and instructions for use (IFU).Theperformance requirements for the printed test piece after additivemanufacturing and forming include the verification of the mechanicalstrength of the printed test piece in each direction, which shouldsimulate as far as possible the actual use of the dental restorationsin clinical application, with its fatigue and resistance to repeatedbending taken into consideration. The corrosion resistance, inclusionsand porosity, and warping of the printed test piece should also beverified.


关于作者

问题动态

发布时间
2023-09-18 20:50
更新时间
2023-09-18 20:50
关注人数
1 人关注

推荐内容

环氧乙烷(EO)残留限量的指标如何确定?
球囊扩张导管产品技术要求中额定爆破压指标应如何制定?
定制式义齿生产企业,预增加活动义齿的切削树脂基托产品,原材料已做生化检测,注册检验是否可以按照原产品技术要求检测,不再做生化检测?
变更样本检测用量的情况,需要提交哪些资料?
How to determine the naming rules for softwareversion?
基台类产品进行临床评价时,如申报产品材质为合金(Ti6A4V ),是否可以选择纯材质(TA4)产品作为同品种医疗器械进行比对?
医用电气设备的产品名称是否可添加“便携式、手持式”等特征词?
血液透析浓缩物产品注册申报时,产品检测报告中应关注哪些内容?
输液管路与高压造影管路在产品结构组成类似、材料相同的情况下,是否可以列入同一注册单元?
经导管三尖瓣夹与同企业经导管二尖瓣夹在设计、材料组成、生产工艺等方面相同,经导管三尖瓣夹是否可以引用经导管二尖瓣夹产品研究资料?